Belkin F6D3230-4 Quick Install Manual

Make sure you have
the following:
Installation Dual-Band Power Supply Ethernet Cable
Software CD Wireless A+G
Router
Manual Setup Auto CD Setup
Users without a CD-ROM Users of
drive can go to "Alternate
Windows ® 98SE
Setup Method" on page 22
Windows Me
in your User Manual.
Windows 2000
Windows XP
Mac OS ® 9.2 and X
can use the Easy Install Wizard
software to set up the Router.
Make sure you have the following 1
1.
Install
Important: Run the Easy Install Wizard Software fi rst!
1.1
Do not connect the Router at this time. From the computer that is directly
connected to your high-speed cable or DSL modem, shut down any programs,
firewall, and Internet-sharing software applications that are running.
1.2 Windows Users: Insert the Easy Install
Wizard software CD into your CD-ROM
drive. The Easy Install Wizard screen will
automatically appear on your screen within
15 seconds. Click "Next" to start the setup.
Mac OS Users: Insert the CD into your
CD-ROM drive. A drive will appear on
your desktop called "Belkin Easy Install".
Double-click the drive to open it.
Mac OS 9 users—double-click the program
called "Easy Install OS 9".
Mac OS X users—double-click the program
called "Easy Install OSX.dmg". The Easy
Install Wizard screen will appear. Click
"Next" to start the setup.
Next
(click)
NOTE for Windows Users:
If the Easy Install Wizard does not start up
automatically, select your CD-ROM drive from
"My Computer" and double-click on the file
Install 2
named "EasyInstall.exe" on the CD-ROM.
1.3
You will now see the first of a series of
progress screens to help you know where you
are in the setup process. Click "Next"
to continue.
2. Connect
(click) Next
Connect your Router to your computer and modem
1.4 The next screen will tell you that the Wizard
is examining your network settings. When the
Wizard is finished examining your settings,
click "Next".
Install 3
2.1
This step instructs you to locate the cable
connected between your modem and the
networking port on your computer. Unplug
this cable from the computer and plug it into
the GREEN port on the Router. Click "Next" to
continue. (The color of your modem cable may
vary from this setup image.)
Next
(click)
2.2 This step instructs you to locate the BLUE cable
that is included with your Router. Plug one end of
this cable into ANY one of the BLUE ports on your
Router. Plug the other end of the cable into the
networking port on your computer. Click "Next" to
continue.
Next
(click)
Connect 4
2.3
This step instructs you to locate the power supply
that is included with your Router. Plug the power
supply's small connector into the GRAY port on
the Router. Plug the power supply into an empty
power outlet. Click "Next" to continue.
Next
(click)
2.4
This step instructs you to look at the lights on the
front of your Router. Make sure the appropriate
lights are ON. Refer to the Easy Install Wizard
software on your computer's screen for more
details. Click "Next"
to continue.
Next
(click)
Connect 5