Setting Wpa/Wpa2-Personal (Psk) - Belkin F6D6230XX4 User Manual

UsINg THe Web-baseD aDVaNCeD UseR INTeRfaCe
sections
table of contents

setting WPa/WPa2-Personal (PsK)

1� After you've set up your Router, go to the "Security" page under
"Wireless" and select "WPA/WPA2-Personal (PSK)" from the "Security
Mode" drop-down menu .
2� For "Authentication", select "WPA-PSK", "WPA2-PSK", or "WPA-
PSK + WPA2-PSK" . This setting will have to be identical on the wireless
clients that you set up . "WPA-PSK + WPA2-PSK" mode will allow the
Router to support clients running either WPA or WPA2 security .
3� For "Encryption Technique" will auto-fill depending on the
authentication type above . This setting will have to be identical on the
wireless clients that you set up .
4� Enter your pre-shared key (PSK) . This can be from eight to 63
characters and can be letters, numbers, or symbols . This same key must
be used on all of the wireless clients that you set up . For example, your
PSK might be something like: "Smith family network key" . Click "Apply
Changes" to finish . You must now set all wireless clients to match these
settings .
Double N+ Wireless Router
1 2 3 4 5 6
IMPoRTaNT: Make sure your wireless computers are updated to work
with WPA2 and have the correct settings to get proper connection to the
Router .
44
7 8 9 10