Belkin F6D6230XX4 User Manual page 70

UsINg THe Web-baseD aDVaNCeD UseR INTeRfaCe
sections
table of contents
Changing system settings
The "System Settings" page is where you can enter a new administrator
password, set the time zone, or enable remote management .
setting or Changing the administrator Password
The Router ships with NO password entered . If you wish to add a
password for greater security, you can set a password here . Write down
your password and keep it in a safe place, as you will need it if you need
to log into the Router in the future . It is also recommended that you set a
password if you plan to use the remote management feature of your Router .
Changing the login Time-out setting
The login time-out option allows you to set the period of time that you can be
logged into the Router's advanced setup interface . The timer starts when there
has been no activity . For example, imagine you have made some changes in
the advanced setup interface, then left your computer alone without clicking
"Logout" . Assuming the time-out is set to 10 minutes, 10 minutes after you
leave, the login session will expire . You will have to log into the Router again
to make any more changes . The login time-out option is for security purposes
and the default is set to 10 minutes . Note: Only one computer can be logged
into the Router's advanced setup interface at one time .
Double N+ Wireless Router
1 2 3 4 5 6
setting the Time and Time Zone
The Router keeps time by connecting to a Simple Network Time
Protocol (SNTP) server . This allows the Router to synchronize the system
clock to the global Internet . The synchronized clock in the Router is
used to record the security log and control client filtering . Select the
time zone that you reside in . You have the option to select a primary and
a backup NTP server to keep your Router's clock synchronized . Select
your desired NPT server from the drop-down box, or simply keep it as is .
If you reside in an area that observes daylight saving, then place a check
mark in the box next to "Enable Daylight Saving" . The system clock
may not update immediately . Allow at least 15 minutes for the Router to
contact the time servers on the Internet and get a response . You cannot
set the clock yourself .
68
7 8 9 10