Belkin F6D6230XX4 User Manual page 30

alTeRNaTe seTUP MeTHoD
sections
table of contents
setting your Internet service Provider (IsP) Connection Type to static IP
A static IP address connection type is less common than other connection types . If your ISP uses static IP addressing, you will need your IP address,
subnet mask, and ISP gateway address . This information is available from your ISP or on the paperwork that your ISP left with you . Type in your
information, then click "Apply Changes" (4) . After you apply the changes, the Internet Status indicator will read "connection OK" if your Router is set
up properly .
Double N+ Wireless Router
1 2
(1) (2)(3)
3 4 5
1� IP address
Provided by your ISP . Enter your IP address here .
2� subnet Mask
Provided by your ISP . Enter your subnet mask here .
3� IsP gateway address
Provided by your ISP . Enter the ISP gateway address here .
28
6 7 8 9 10