Belkin F6D6230XX4 User Manual page 76

MaNUally CoNfIgURINg NeTWoRK seTTINgs
sections
table of contents
Manually Configuring Network settings in Windows 2000, NT, or XP
1�
Click "Start", "Settings", then "Control Panel" .
2� Double-click on the "Network and dial-up connections" icon
(Windows 2000) or the "Network" icon (Windows XP) .
3� Right-click on the "Local Area Connection" associated with your
network adapter and select "Properties" from the drop-down
menu .
4�
In the "Local Area Connection Properties" window, click "Internet
Protocol (TCP/IP)" and click the "Properties" button . The following
screen will appear:
Double N+ Wireless Router
1 2 3
(1)
(2)
(3)
4 5 6
5� If "Use the following IP address" (2) is selected, your Router will
need to be set up for a static IP connection type . Write the address
information the table below . You will need to enter this information
into the Router .
6� If not already selected, select "Obtain an IP address automatically"
(1) and "Obtain DNS server address automatically" (3) . Click "OK" .
your network settings are now configured for use with the Router�
74
7 8 9 10