Belkin F6D6230XX4 User Manual page 12

KNoWINg yoUR RoUTeR
sections
table of contents
K� Connections to Wired Computers
Connect your wired (non-wireless) computers to these ports . These
ports are RJ45, 10/100/1000 auto-negotiation, auto-uplinking ports for
standard UTP category 5 or 6 Ethernet cable . The ports are labeled 1
through 4 .
l� Usb Port
Plug in your USB storage device here .
M� Connection to Modem
This port is for connection to your cable or DSL modem . Use the cable
that was provided with the modem to connect the modem to this port .
Use of a cable other than the one supplied with the cable modem may
not work properly .
N� Reset button
The "Reset" button is used in rare cases when the Router may function
improperly . Resetting the Router will restore the Router's normal
operation while maintaining the programmed settings . You can also
restore the factory default settings by using the "Reset" button . Use the
restore option in instances where you may have forgotten your custom
password .
i� Resetting the Router
Push and release the "Reset" button . The lights on the Router will
momentarily flash . The "Power/Router" light will begin to blink . When
the "Power/Router" light becomes solid again, the reset is complete .
Double N+ Wireless Router
1 2 3 4 5 6
ii� Restoring the factory Defaults
Press and hold the "Reset" button for at least 10 seconds, then
release it . The lights on the Router will momentarily flash . The
"Power/Router" light will begin to blink . When the "Power/Router"
light becomes solid again, the restore is complete .
o� Power Jack – black
Connect the included 15V/1 .25A DC power supply to this jack .
P� "Reconnect" button
The "Reconnect" button provides a
simple way to alleviate wireless and
Internet-connection difficulties . Upon
pushing this button, the Router will
automatically scan and set itself on the
cleanest channel, turn on high-speed
mode (20/40MHz mode), and renegotiate
your connection with your ISP (Internet
Service Provider) . Please note that any
devices connected to the Router will be
intermittently disconnected while the
Router performs these tasks .
Common issues that "Reconnect" will fix:
• Slow or inconsistent download
speeds due to interferences from other
devices on the 2 .4GHz band .
• Lost Internet connection, which can
be caused by problems with the ISP or
modem . Please also reset your modem
before using "Reconnect" to regain
connection to your ISP .
10
7 8 9 10
(K)
(L)
(M)
(N)
(O)