Setup Assistant - Belkin F6D6230XX4 User Manual

CoNNeCTINg aND CoNfIgURINg yoUR RoUTeR
sections
table of contents
Verify the contents of your box� you should have the following:
• Belkin Double N+ Wireless Router
•
RJ45 Ethernet Networking Cable
•
Power Supply
• Belkin Setup Assistant Software CD
• User Manual on the Setup Assistant CD
• Network Status Display Guide
Modem Requirements
Your cable or DSL modem must be equipped with an RJ45 Ethernet
port . Many modems have both an RJ45 Ethernet port and a USB
connection . If you have a modem with both Ethernet and USB, and are
using the USB connection at this time, you will be instructed to use the
RJ45 Ethernet port during the installation procedure . If your modem has
only a USB port, you can request a different type of modem from your
ISP, or you can, in some cases, purchase a modem that has an RJ45
Ethernet port on it .
Ethernet USB
Double N+ Wireless Router
1 2 3 4 5 6

setup assistant

Belkin has provided our Setup Assistant software to make installing your
Router a simple and easy task . You can use it to get your Router up and
running in minutes . The Setup Assistant requires that your computer be
connected directly to your cable or DSL modem and that the Internet
connection is active and working at the time of installation . If it is not,
you must use the "Alternate Setup Method" section of this User Manual
to configure your Router . Additionally, if you are using an operating
system other than Windows 2000, XP, Vista or Windows 7, or Mac OS X
v10 .x, you must set up the Router using the "Alternate Setup Method"
section of this User Manual .
11
7 8 9 10