Table of Contents
Advertisement
DIN Rail Mounting - Power Supply
The power supply can be mount ed on a DIN rail.
1.
At t ach DIN rail clip t o t he power supply using t he screws (M4X6mm) provided.
2.
Hook t he bot t om of t he DIN rail cl ip under t he bot t om of t he DIN rail.
3.
Push up, compressing t he t ension spring at t he bot t om of t he DIN rail clip.
4.
Once t he t op of t he DIN rail clip is over t he t op of t he DIN rail release t he t ension on t he t ension
spring and ensure t he t op and bot t om of t he DIN rail clip are securely at t ached.
Warning. When mount ed vert ically, suit able f or mount ing on concret e or ot her
non-combust ible surf aces only (as shown).
DIN Rail Clip - At t achment
DIN Rail Unmounting - Power Supply
1.
Push up, compressing t he t ension spring at t he bot t om of t he DIN rail clip.
2.
Once t he t op of t he DIN rail clip is above t he t op of t he DIN rail, lif t t he unit f rom t he DIN rail.
OmniSwit ch 6865 Hardware Users Guide
DIN Rail Mounting Power Supply
Power Supply - Mount ed
36
Advertisement
Table of Contents
