Table of Contents
Advertisement
DIN Rail Mounting - Chassis
The chassis can be mount ed on a DIN rail (OS6865-DIN-MNT).
1.
At t ach t wo (2) f lat bracket s t o f ront and rear of chassis side mount bracket s using f our (4) screws
(M5X10mm) provided f or each f lat bracket .
2.
Hook t he t op of t he DIN rail cl ips over t he t op of t he DIN rail.
3.
Rot at e assembly down and pull down on t he DIN rail clip st rap allowing bot t om of DIN rail clip t o
hook on t he bot t om of t he DIN rail.
4.
Release t he DIN rail clip st rap, securing t he assembly in pl ace.
Warning. When mount ed vert ically, suit able f or mount ing on concret e or ot her
non-combust ible surf aces only (as shown).
Flat Bracket Assembl y
DIN Rail Unmounting - Chassis
1.
Pull down on t he DIN rail clip st raps releasing t he bot t om of DIN rail clips.
2.
Rot at e t he bot t om of t he assembly away f rom t he DIN rail and lif t t he assembly of f t he DIN rail.
OmniSwit ch 6865 Hardware Users Guide
Attaching Brackets To Chassis
Flat Bracket s t o Chassis
37
Advertisement
Table of Contents
