Table of Contents
Advertisement
3.3.4 Removing the CD traverse mechanism
(See Fig.11 and 12)
(1) For dismounting only the CD traverse mechanism without
removing the CD loading mechanism assembly, align the
shaft j of the CD loading mechanism assembly to the po-
sition shown Fig.11 while turning the cam R1 and R2 as-
sembly in the arrow direction k .
(2) By raising the CD loading mechanism assembly in the ar-
row direction l , remove the assembly from the lifter unit.
3.3.5 Removing the CD pick unit
(See Fig.13)
(1) Move the cam gear in the arrow direction m . Then, the CD
pickup unit will be moved in the arrow direction n .
(2) According to the above step, shift the CD pickup unit to the
center position.
(3) While pressing the stopper retaining the shaft in the arrow
direction o , pull out the shaft in the arrow direction p .
(4) After dismounting the shaft from the CD pickup unit, re-
move the CD pickup unit.
All manuals and user guides at all-guides.com
Cam R1, R2 assembly
j
Fig.11
Lifter unit
Fig.12
CD Pickup unit
Shaft
p
o
Stopper
Fig.13
k
Arrow
CD traverse mechanism
l
Arrow
n
CD loading
mechanism
m
Shaft
Cam gear
Shaft
Stopper
(No.MB011)1-21
Advertisement
Table of Contents
