Table of Contents
Advertisement
3.1.7 Removing the main board
(See Fig.17 ~ 19)
• Prior to performing the following procedure, remove the metal
cover, the CD changer mechanism assembly, the rear panel
and the antenna board.
(1) Disconnect the card wires from connector CN870,
and
CN315
on the main board.
(2) Disconnect the wires from connector
on the amplifier board.
(3) Disconnect the wire from connector
board.
(4) Remove the screw I attaching the main board on the right
side ofthe body.
(5) Disconnect connector
board from the regulator board.
3.1.8 Removing the speaker board
(See Fig.19)
• Prior to performing the following procedure, remove the metal
cover, the CD changer mechanism assembly and the rear pan-
el.
REFERENCE:
It is not necessary to remove the main board.
(1) Disconnect connector
the regulator board.
(2) Disconnect the wire from connector
board.
All manuals and user guides at all-guides.com
CN704
and
CN710
on the speaker
CN211
and
CN212
on the main
CN217
on the speaker board from
CN710
on the speaker
CN315
CN871
Amplifier board
CN704
CN706
CN706
Speaker board
Front panel assembly
Regulator board
Regulator board
Main board
CN870
Front panel assembly
CN871
CN710
Fig.17
I
CN212
Fig.18
Speaker board
CN710
CN217
Fig.19
Main board
CN211
(No.MB011)1-11
Advertisement
Table of Contents
