Table of Contents
Advertisement
3.2.4 Removing the preset / tuning switch board
(See Fig.32, 33)
• Prior to performing the following procedure, remove the dis-
play system control board.
(1) Pull out the preset knob on the front panel.
(2) Remove the four screws R attaching the preset / tuning
switch board.
(3) If necessary, unsolder FW901 on the preset / tuning switch
board.
3.2.5 Removing the operation switch board
(See Fig.33, 34)
• Prior to performing the following procedure, remove the dis-
play system control board and the preset / tuning switch board.
(1) Pull out the volume knob on the front panel and remove the
nut. Pull out the surround mode knob, the mic level knob
and the surround woofer level knob toward the front.
(2) Remove the twelve screws S
switch board.
(3) Release each tab of the seven joints d retaining the opera-
tion switch board.
All manuals and user guides at all-guides.com
attaching the operation
Preset / tuning switch board
R
Fig.32
Preset knob
Surround mode knob
Volume knob
Nut
Fig.33
Joint d
S
Joint d
S
Joint d
S
S
Joint d
Fig.34
R
Surround woofer
level knob
Mic level knob
S
Operation
switch board
S
S
Joint d
(No.MB011)1-17
Advertisement
Table of Contents
