Table of Contents
Advertisement
3.3
CD Changer Mechanism
• Remove the CD changer mechanism assembly.
3.3.1 Removing the CD Servo control board
(See Fig.1)
(1) From bottom side the CD changer mechanism assem-
bly,remove the four screws A retaining the CD servo con-
trol board.
(2) Absorb the four soldered positions a of the right and left
motors with a soldering absorber.
(3) Pull out the earth wire on the CD changer mechanism as-
sembly.
(4) Disconnect the connector
board.
(5) Disconnect the card wire
on the CD servo control board.
1-18 (No.MB011)
All manuals and user guides at all-guides.com
CN854
on the CD servo control
CN601
and the connector
CN801
A
a
CD servo control board
CN801
CN601
A
Fig.1
a
CN854
A
CN651
CN151
A
Advertisement
Table of Contents
