Table of Contents
Advertisement
3.2.2 Removing the display system control board
(See Fig.28 ~ 30)
(1) Remove the four screws O attaching the stay bracket.
(2) Disconnect the card wires from connector
CN880
on the display system control board.
(3) Remove the seven screws P attaching the display system
control board.
(4) If necessary, disconnect the wire from connector
the front side of the display system control board and un-
solder FW915.
3.2.3 Removing the CD eject board
(See Fig.30, 31)
(1) Remove the three screws Q attaching the CD eject board.
(2) If necessary, unsolder FW915 on the CD eject board.
1-16 (No.MB011)
All manuals and user guides at all-guides.com
CN316
and
CN911
on
FW915
(Solding)
Display system control board
CD eject board
Display system control board
Fig.28
P
CN316
P
P
Display system control board
CN880
Fig.29
CN911
Fig.30
Q
FW915
(Solding)
Q
Fig.31
O
Stay bracket
P
P
CD eject board
FW915
FW915
Advertisement
Table of Contents
