Table of Contents
Advertisement
Integrated Peripherals à Onboard Parallel Port
Onboard Parallel
Port
3BC/IRQ7
378/IRQ7
278/IRQ7
Disabled
Note: If you are using an I/O card with a
parallel port, make sure that the addresses
and IRQ do not conflict.
Integrated Peripherals à Parallel Port Mode
Parallel Port Mode
Normal
SPP
EPP 1.7 + SPP
EPP 1.9 + SPP
ECP
EPP 1.7 + ECP
EPP 1.9 + ECP
Integrated Peripherals à ECP Mode Use DMA
ECP Mode Use DMA
3
1
This item controls the onboard parallel port address
and interrupt.
This item lets you set the parallel port mode. The
mode options are Normal (Standard and Bidirection
Parallel Port), EPP (Enhanced Parallel Port) and
ECP (Extended Parallel Port). Normal is the IBM AT
and PS/2 compatible mode.
parallel port throughput by directly writing/reading
data to/from parallel port without latch. ECP supports
DMA and RLE (Run Length Encoded) compression
and decompression. EPP1.7 and EPP1.9 are
protocol difference.
This item lets you set the DMA channel of ECP
mode.
AWARD BIOS
EPP enhances the
3-33
Advertisement
Table of Contents
