Table of Contents
Advertisement
PNP/PCI Configuration à Resources Controlled By
Resources Controlled
by
Auto
Manual
PNP/PCI Configuration à Reset Configuration Data
Reset Configuration
Data
Enabled
Disabled
PNP/PCI Configuration à IRQ3 (COM2)
PNP/PCI Configuration à IRQ4 (COM1)
PNP/PCI Configuration à IRQ5 (Network/Sound or Others)
PNP/PCI Configuration à IRQ7 (Printer or Others)
PNP/PCI Configuration à IRQ9 (Video or Others)
PNP/PCI Configuration à IRQ10 (SCSI or Others)
PNP/PCI Configuration à IRQ11 (SCSI or Others)
PNP/PCI Configuration à IRQ12 (PS/2 Mouse)
PNP/PCI Configuration à IRQ14 (IDE1)
PNP/PCI Configuration à IRQ15 (IDE2)
IRQ 3
Legacy ISA
PCI/ISA PnP
Setting this option to Manual allows you to
individually assign the IRQs and DMAs to the ISA
and PCI devices. Set this to Auto to enable the auto-
configuration function.
In case conflict occurs after you assign the IRQs or
after you configure your system, you can enable this
function, allow your system to automatically reset
your configuration and reassign the IRQs.
If your ISA card is not PnP compatible and requires a
special IRQ to support its function, set the selected
IRQ to Legacy ISA . This setting informs the PnP
BIOS to reserve the selected IRQ for the installed
legacy ISA card. The default is PCI/ISA PnP. Take
note that PCI cards are always PnP compatible
(except old PCI IDE card).
AWARD BIOS
3-25
Advertisement
Table of Contents
