Table of Contents
Advertisement
AWARD BIOS
Power Management à RTC WakeUp Timer
RTC WakeUp Timer
The RTC WakeUp Timer can be programmed at a
specified date/time to wakeup the system. The
Disabled
Date/Time is set by " WakeUp Date (of Month)" and
Wake Up
"WakeUp Time (hh:mm:ss)". For automatic power off,
Power Off
you can select the idle timer in "Doze Mode" +
"Standby Mode" + "Suspend Mode" to power off after
system is detected without any activities.
Power Management à WakeUp Date (of Month)
Date (of Month)
This item selects the date of month to on which to
Alarm
wake up or power off the system. Set to 0 means
everyday.
0
1
2
......
30
31
Power Management à Wake Up Time (hh:mm:ss)
Time (hh:mm:ss)
This item selects the time at which to wake up or
Alarm
power
hour:minute:second, note that hour is in 24 hours
07:00:00
form.
.. : .. : ..
Power Management à IRQ 8 Clock Event
IRQ 8 Clock Event
To enable or disable the detection of IRQ8 (RTC)
event for power down state transition. OS2 has
Enabled
periodically IRQ8 (RTC) interruptions, If IRQ8 is not
Disabled
set to Disabled , OS/2 may fail to go into
Doze/Standby/Suspend mode.
3-22
off
the
system.
The
format
is
Advertisement
Table of Contents
