Toyota AURION Owner's Manual page 92

Front of vehicle
Anchor fitting
3. Fix the child restraint system with the
seatbelt.
Attach the child restraint anchor at-
taching clip to the exposed child re-
straint anchor fitting. Make sure the
clip is securely attached and tighten
the upper anchorage strap.
For instructions to install the child restraint
system, see "Child restraint" on page 78 in
this Section.
Be sure to close the cover when the child re-
straint anchor fitting is not in use.
Attaching clip
Upper
anchorage
strap
OCCUPANT RESTRAINT SYSTEMS
CAUTION
Make sure the upper anchor strap is se-
curely latched, and check that the child
restraint system is secure by pushing
and pulling it in different directions. Fol-
low all the installation instructions pro-
vided by its manufacturer.
81