Locking And Unlocking Doors - Toyota AURION Owner's Manual

—Locking and unlocking doors

Locking operation (vehicles with standard-
type ignition switch)
Locking operation (vehicles with smart entry
and start system)
Unlocking operation (vehicles with stan-
dard-type ignition switch)
Unlocking operation (vehicles with smart
entry and start system)
To lock and unlock all the doors, press the
switches slowly and securely.
To lock: Press the lock switch. All the doors
are locked simultaneously. At this time, one
beep will sound and the turn signal lights
flash once.
Check to see that all the doors are securely
locked.
If any door is not securely closed, or if the
key is in the ignition switch (with standard-
type ignition switch) or key left in the vehicle
(vehicles with smart entry and start system),
locking cannot be performed by the lock
switch and a beep will sound continuously for
10 seconds.
To stop the beep, take out the key from the
vehicle or press the unlock switch.
The answerback function can be changed.
For details, contact your Toyota dealer.
To unlock: Press the unlock switch. All the
doors are unlocked simultaneously. At this
time, two beeps will sound and the turn signal
lights flash twice.
When you unlock the doors using the wire-
less remote control, the illuminated entry
function will be activated. For further informa-
tion, see "Illuminated entry system" on page
95 in Section 1--5.
KEYS AND DOORS
19