Toyota AURION Owner's Manual page 35

KEYS AND DOORS
3. Remove the discharged transmitter bat-
tery by flathead screwdriver or equiva-
lent. Insert the guide groove and lift as
shown in the above illustration.
NOTICE
Do not modify the battery case. It may
cause a transmitter malfunction.
4. Put in a new battery with the positive (+)
side up. Install the cover and insert the
mechanical key into the transmitter.
5. Close the transmitter case securely.
24
NOTICE
Make sure the positive side and nega-
D
tive side of the transmitter battery are
faced correctly.
Do not replace the transmitter battery
D
with wet hands. Water may cause rust.
Do not touch or move any compo-
D
nents inside the transmitter, or it may
interfere with proper operation.
Be careful not to bend the electrode
D
when inserting the transmitter battery
and that dust or oils do not adhere to
the case.
Close the transmitter case securely.
D
After replacing the battery, check that the
transmitter operates properly. If the trans-
mitter still does not operate properly, contact
your Toyota dealer.