Toyota AURION Owner's Manual page 166

Fan speed selector
Turn the knob to adjust the fan speed—to the
right to increase, to the left to decrease.
Temperature selector
Turn the knob to adjust the temperature—to
the right to warm, to the left to cool.
Air flow selector
Turn the knob to select the vents used for air
flow.
1. Panel—Air flows mainly from the instru-
ment panel vents.
2. Bi-level—Air flows from both the floor
vents and the instrument panel vents.
3. Floor—Air flows mainly from the floor
vents.
4. Floor/Windshield—Air flows mainly from
the floor vents and windshield vents.
5. Windshield—Air flows mainly from the
windshield vents.
This position allows the air intake to
select FRESH automatically. This is to
clean up the front view more quickly.
If you want to return the setting to
RECIRCULATE mode, press the air in-
take selector button once again.
For details about air flow selector settings,
see "Air flow selector settings" described on
the following page.
AIR CONDITIONING SYSTEM
Air intake selector
Press the button to select the air source.
1. RECIRCULATE (indicator light is on)—
Recirculates the air inside the vehicle.
2. FRESH (indicator light is off)—Draws out-
side air into the system.
To prevent fogging up of the windshield, the
air intake mode may change automatically to
FRESH depending on the condition of the air
conditioning system.
A/C button
To turn on the air conditioning, press the A/C
button. The A/C button indicator will come on.
To turn the air conditioning off, press the but-
ton again.
If the A/C button indicator flashes, there is
a problem in the air conditioning system and
the air conditioning automatically shuts off.
If this happens, take your vehicle to a Toyota
dealer for service.
155