Using Inserts - Bosch AutoCook MUC6 Series Instruction Manual

Hide thumbs Also See for AutoCook MUC6 Series:
Table of Contents

Advertisement

Available languages

Available languages

  • ENGLISH, page 1
en

Using inserts

The appliance heats up the appliance interior
until the target temperature or the selected
steam pressure of the next preparation step
is reached. During the heating phase, lines
that light up in a clockwise direction appear
in the display. Once the target temperature
or selected steam pressure is reached, the
lines go out and the next preparation time
is shown in the display. The preparation
process starts automatically. The preparation
time counts down.
Prematurely terminating the
current preparation step
If the ingredients are cooked ahead of time
during one of the preparation steps, the
step can also be terminated manually.
1. To do this, press button G for at least
2 seconds.
This will terminate the current preparation
step. An audible signal will then sound as
usual once the next step can be carried out.
In the control panel, LEDs 1, 2, 3 or 4 are
shown accordingly and button G flashes.
2. Perform the next preparation step.
Keep warm function
Certain preparation programmes include the
keep warm function. X "List of preparation
programmes" see page 26
If the preparation programme features the
keep warm function, this is switched on auto-
matically once the dish is ready and keeps
the dish warm for up to 10 hours at 40°C
(pre-configured keep warm time depending
on the preparation programme). [ готово ]
(finished) and [ подогрев ] (keep warm) light
up. A rectangle lights up in the display (dotted
lines). The keep warm function can be ended
using button H. The appliance subsequently
switches to function selection mode.
20
Using inserts
Using the deep frying basket
It is necessary to use the deep frying
basket (depending on the model) in order to
prepare meat, fish, chips, etc. in hot oil.
Note: For the best and tastiest results, we
recommend using the suggestions in our
recipe book. X See recipe book provided
Example: Preparation programme
[ фритюр ] (deep fry)
W Risk of scalding!
■ Never use the steam pressure function
during deep frying. It is automatically
disabled for the preparation programme
[ фритюр ] (deep fry).
■ Fill with oil or deep-frying fat up to the
mark [ 1.0 I ] at maximum.
■ Do not use more than 200 g of frozen
food or 300 g of non-frozen food for
deep frying.
■ During preparation, large amounts of
steam may accumulate in the appliance.
Open the lid with care. Do not lean over
the lid of the appliance.
■ The pan and any inserts that are used
may be very hot. Always use pan tongs,
suitable handles or oven gloves.
■ Never use spatulas or ladles with hot fat
or oil.
1. Open the lid of the appliance.
2. Fill the pan with a maximum of 1 litre of
oil. The measuring scale on the inside
of the pan can also be used to read the
quantity.
3. Put the lid on.
4. In function selection mode, select the
preparation programme [ фритюр ]
(deep frying) X "List of preparation
programmes" see page 26
5. Press button G to start the preparation
programme.
The oil is heated. Once the target
temperature is reached, an audible signal
sounds and button G flashes.
6. Fill the deep frying basket with food for
deep frying.
7. Open the lid of the appliance.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Autocook muc8 series

Table of Contents