Bosch AutoCook MUC6 Series Instruction Manual page 14

en Preparation
1. The appliance is ready to use. Fill the
appliance with the desired ingredients.
To do this, open the lid and pour the
ingredients into the pan. The measuring
scale on the inside of the pan can also
be used to read the quantity.
Caution!
■ Fill the pan with a maximum of 4 litres.
Only fill the pan at most half-full when
preparing food that expands during
cooking, e.g. rice or dried vegetables.
2. Close the appliance. Press the lid down
until it clicks into place.
3. Press button B to access function
selection mode.
The desired preparation programme is
selected in function selection mode and all
settings of the appliance are made. Button B
as well as the indicator [ мой режим ] (my
mode) lights up permanently. Button G
flashes. "00:00" is shown in the display.
Notes:
■ Certain preparation programmes or
steps are carried out with the lid open.
X See recipe book provided
■ If no input is made on the control
panel within 5 minutes, the appliance
automatically switches to standby mode.
1. Keep pressing button D until the
desired preparation programme is
selected.
14
The corresponding LED lights up in the
control panel and the pre-configured
preparation time for the selected
preparation programme flashes.
2. Press button G to start the preparation
programme.
The appliance heats up the pan until the
target temperature is reached. During
the heating phase, lines that light up in a
clockwise direction appear in the display.
Once the target temperature is reached,
the lines go out and the preparation time is
shown in the display.
The preparation process starts
automatically.
Note: When the programme [ паста ] (pasta)
or [ фритюр ] (deep frying) is selected, a
repeating audible signal is emitted and the
display and button G flash until the food
has been added and button G has been
pressed.
The preparation time counts down.
Cooking produces steam, which escapes
from the appliance to prevent excess
pressure from building up.