Bosch AutoCook MUC6 Series Instruction Manual page 11

5. Remove the valve plug
Pull off the valve plug in the steam
release chamber.
6. Open the appliance lid
Open the pressure locking handle (M).
For this purpose, rotate the pressure
locking handle as far as possible in
an anti-clockwise direction. Press the
opening button on the basic appliance to
open the lid.
7. Lift the pan out of the appliance interior.
8. Remove the lid insert
Turn the fastening screw anti-clockwise
and remove it. Use one hand to keep the
lid insert in position on the inside of the
lid. Use the other hand on the outside
of the lid to push the steam valve in the
steam release chamber through the
opening by applying slight pressure.
Before using for the first time
9. Carefully remove the lid insert from
the lid.
10. Remove the packaging material that
is on the appliance and the accessory
parts.
11. Check all parts for completeness.
X Figure A
12. Check the appliance and the accessory
parts for visible damage.
Caution!
Never operate a damaged appliance!
13. Thoroughly clean and dry all parts
before using for the first time. X "Care
and daily cleaning" see page 24
14. Check safety devices
Lid insert: Check the sealing ring on
the lid insert for visible discolouration,
cracks or other damage.
Check that the safety and steam valve
as well as the overpressure protection
are clean. They must not be blocked
by foreign bodies. The overpressure
protection must be able to move freely.
Steam release chamber: Check the
steam valve seal in the steam release
chamber for visible discolouration,
cracks or other damage. Check that
the white steam release lever is clean.
It must not be blocked by foreign bodies.
15. Insert pan
Reinsert the pan in the appliance
interior. The pan handles must be sunk
into the indentations.
Caution!
Before inserting the pan, check that the
appliance interior is dry and clean.
en
11