Using Inserts - Bosch MUC6 Series Instruction Manual

Hide thumbs Also See for MUC6 Series:
Table of Contents

Advertisement

Available languages

Available languages

  • ENGLISH, page 1
en

Using inserts

The appliance heats up the appliance
interior until the target temperature or
the selected steam pressure of the next
preparation step is reached. During the
heating phase, lines that light up in a
clockwise direction appear in the display.
Once the target temperature or selected
steam pressure is reached, the lines go out
and the next preparation time is shown in
the display. The preparation process starts
automatically. The preparation time counts
down.
Prematurely terminating the
current preparation step
If the ingredients are cooked ahead of time
during one of the preparation steps, the
step can also be terminated manually.
1. To do this, press the G button for at
least 2 seconds.
This will terminate the current preparation
step. An audible signal will then sound as
usual once the next step can be carried out.
In the control panel, LEDs 1, 2, 3 or 4 are
shown accordingly and button G flashes.
2. Perform the next preparation step.
Keep warm function
Certain preparation programmes include
the keep warm function. X "List of prepara-
tion programmes" see page 22
If the preparation programme features the
keep warm function, this is switched on
automatically once the dish is ready and
keeps the dish warm for up to 10 hours
at 40°C (pre-configured keep warm time
depending on the preparation programme).
[ готово ] (ready) and [ подогрев ] (keep
warm) light up. A rectangle lights up in
the display (dotted lines). The keep warm
function can be ended using button H. The
appliance subsequently switches to function
selection mode.
16
MUC6-8_RU_8001018000.indb 16
Extending the preparation time
If the ingredients are not yet fully cooked
shortly before the end of a preparation
programme, the preparation time can be
extended.
1. To do this, press and hold the F button.
The current preparation time will briefly be
shown on the display and will then increase
in 1-minute increments.
2. Press and hold the button until the
desired preparation time has been
reached.
3. Activate the newly set preparation time
using the G button.
Note: If the desired preparation time is
exceeded because the F button was held
down for too long, do not confirm the new
setting. Wait for a moment until the current
preparation time is displayed again and
then repeat the process.
Using inserts
Using the deep frying basket
It is necessary to use the deep frying
basket (depending on the model) in order to
prepare meat, fish, chips, etc. in hot oil.
Note: For the best and tastiest results, we
recommend using the suggestions in our
recipe book. X See recipe book provided
Example: Preparation programme
[ фритюр ] (deep fry)
W Warning
Risk of burns!
■ Never use the steam pressure function
during deep frying. It is automatically
disabled for the preparation programme
[ фритюр ] (deep fry).
■ Fill with oil or deep-frying fat up to the
mark [ 1.0 I ] at maximum.
■ Do not use more than 200 g of frozen
food or 300 g of non-frozen food for
deep frying.
16.07.2015 12:15:08

Advertisement

Table of Contents
loading

This manual is also suitable for:

Muc8 series

Table of Contents