14.4.1 Using UPnP in Windows XP Example
This section shows you how to use the UPnP feature in Windows XP. You must already have UPnP
installed in Windows XP and UPnP activated on the NBG-418N v2.
Make sure the computer is connected to a LAN port of the NBG-418N v2. Turn on your computer
and the NBG-418N v2.
14.4.1.1 Auto-discover Your UPnP-enabled Network Device
Click start and Control Panel. Double-click Network Connections. An icon displays under
1
Internet Gateway.
Right-click the icon and select Properties.
2
Figure 83 Network Connections
In the Internet Connection Properties window, click Settings to see the port mappings there
3
were automatically created.
Chapter 14 Universal Plug-and-Play (UPnP)
NBG-418N v2 User's Guide
121