Ap Navigation Panel - ZyXEL Communications 760559122614 User Manual

The following table describes the labels shown in the Status screen.
Table 12 Status Screen (AP Mode)
LABEL
Device Information
System Name
Firmware Version
LAN Information
- MAC Address
- IP Address
- IP Subnet Mask
- DHCP Server
WLAN Information
- MAC Address
- Status
- Name (SSID)
- Channel
- Operating Channel
- Security Mode
- 802.11 Mode
- WPS
System Status
Operation Mode
System Up Time
Current Date/Time
System Setting
Firewall
UPnP
Summary
DHCP Table
Packet Statistics

4.3.2 AP Navigation Panel

Use the menu in the navigation panel to configure NBG-418N v2 features in AP Mode.
The following screen and table show the features you can configure in AP Mode.
Chapter 4 Modes
DESCRIPTION
This is the System Name you enter in the Maintenance > System > General
screen. It is for identification purposes.
This is the current firmware version of the NBG-418N v2.
This shows the LAN Ethernet adapter MAC Address of your device.
This shows the LAN port's IP address.
This shows the LAN port's subnet mask.
This shows the LAN port's DHCP server status.
This shows the wireless adapter MAC Address of your device.
This shows the current status of the Wireless LAN - On, Off, or Off by scheduler.
This shows a descriptive name used to identify the NBG-418N v2 in the wireless
LAN.
This shows the channel number which you select manually or the NBG-418N v2
automatically scans and selects.
This shows the channel number which the NBG-418N v2 is currently using over the
wireless LAN.
This shows the level of wireless security the NBG-418N v2 is using.
This shows the IEEE 802.11 standard that the NBG-418N v2 supports. Wireless
clients must support the same standard in order to be able to connect to the NBG-
418N v2
This shows the WPS (WiFi Protected Setup) Status. Click the status to display
Network > Wireless LAN > WPS screen.
This field shows the device operation mode: Router, Access Point, or Universal
Repeater.
This is the total time the NBG-418N v2 has been on.
This field displays your NBG-418N v2's present date and time.
This shows the firewall settings on the NBG-418N v2.
This shows the UPnP
This shows the DHCP clients.
Use this screen to view port status and packet specific statistics.
NBG-418N v2 User's Guide
38