Web Configuration - Planet Networking & Communication SGS-5240 Series User Manual

L2+ stackable managed gigabit ethernet switch with 10gbe uplink
Table of Contents

Advertisement

4. WEB CONFIGURATION

This section introduces the configuration and functions of the Web-based management from Managed Switch.
About Web-based Management
The Managed Switch provides a built-in browser interface. You can manage it remotely by having a remote host with Web
browser, such as Microsoft Internet Explorer, Mozilla Firefox, Google Chrome or Apple Safari.
The following shows how to start up the Web Management of the Managed Switch. Please note the Managed Switch is
configured through an Ethernet connection. Please make sure the manager PC must be set to the same IP subnet address.
For example, the IP address of the Managed Switch is configured with 192.168.0.100 on Interface VLAN 1 and 192.168.1.1 on
Management Port, then the manager PC should be set to 192.168.0.x or 192.168.1.x (where x is a number between 1 and 254,
except 1 or 100), and the default subnet mask is 255.255.255.0.
The factory default user name and password are as follows:
Default IP of Management Port: 192.168.1.1
Default IP of Interface VLAN 1: 192.168.0.100
Username: admin
Password: admin
User's Manual of SGS-5240 Series Managed Switch
Figure 4-1 IP Management Diagram
41

Advertisement

Table of Contents
loading

Table of Contents