Removing The Back Cover; Exploded View Of The Ibm 4836 Assembly - IBM 4836 Planning, Installation And Service Manual

Backlight inverter card
Figure 15. Exploded view of the IBM 4836 assembly
Before you begin
Always practice safety first. Before removing the back cover (or performing any
removal procedures), follow these steps:
1. Turn off power.
2. Remove the power cable.
3. Place the unit on a sturdy surface.

Removing the back cover

Follow these steps to remove the back cover:
1. Place the IBM 4836 face down on a sturdy surface.
2. If installed, remove the MSR and scanner.
28
Anyplace Kiosk 4836
Hinge pin
Main planar shield
HDD door
MSR asm
HDD fan
HDD
System board
LCD shield
Antenna
Touch cable
Cable cover
USB cover
Memory door
Speaker
Scanner asm
Scanner window
Speaker
Heatsink
Memory
Front panel card
Control panel cable
Control panel card
LCD display
Front bezel with
touch system
Control buttons