Rear View And Connectors; Rear View Showing Access Doors, Mounting Holes, Attachment Holes - IBM 4836 Planning, Installation And Service Manual

Rear view and connectors

Figure 2 shows the rear view of the IBM 4836.
Figure 2. Rear view showing access doors, mounting holes, attachment holes
Figure 3 on page 9 shows the IBM 4836 connections.
8
Anyplace Kiosk 4836
A
Hard drive door
B
Memory door
C
Cable cover
D
USB cover
E
Holes that allow for the following standard mounting screws:
v 100 mm x 100 mm (3.93 in. x 3.93 in.)
v 75 mm x 75 mm (2.75 in. x 2.75 in.)
Note: These holes allow for the standard M4 X 10 mm screws specified by
the VESA standard.
F
Tapped holes that allow the attachment and display of marques,
announcements, sales promotions and other information.
Note: These holes allow for M3 screws that cannot protrude into the
machine more than 10 mm.
G
Close up of cable cover thumbscrews