Figure 6. Installing the MSR
3. Align the MSR such that the connectors are slightly above their matching slots
4. Plug the USB cable into the connector.
Figure 7. Placing the grounding strap
5. Lay the grounding strap against the bottom of the opening in the metal shield;
6. Install the hard drive door with MSR latching tab and secure the two screws.
12
Anyplace Kiosk 4836
on the 4836. Slide the MSR downward into position, being careful not to pinch
the MSR cable.
the door will then clamp the strap into place.
A in Figure 7 shows the grounding strap, which is folded for the 12 inch
Note:
unit, unfolded for the 15 inch unit.