Fax Settings - Canon Pixma MP530 User Manual

Important
Be sure to revert this setting to <OFF> after printing since it may result in lower print quality.
EXTENDED AMOUNT
Selects the amount of image that extends off the paper when printing in Borderless (full).
Note
If you set <LARGE> for this function, the area of the image extending off the paper becomes
larger.
AUTO FEED SWITCH
If the Auto Sheet Feeder or Cassette runs out of paper, the paper source automatically switches
to the other one.
Important
This function only works when both paper sources are loaded with paper of the same size
and type.
When printing from a computer, you need to set this feature with the printer driver. For
details, refer to the Printer Driver Guide.
When printing from a computer, this feature can be used only when both paper sources are
loaded with paper other than Credit Card- or Legal-sized paper.
In Copy mode, this feature can be used only when both paper sources are loaded with
paper other than Credit Card- or Legal-sized paper.
In Fax mode, this feature can be used only when both paper sources are loaded with A4-
or Letter-sized plain paper.
Note
For the limit number of paper to load into the Auto Sheet Feeder and Cassette, see the table
in "Changing the Page Size and Media Type" on page

FAX SETTINGS

Before changing any settings, you can print the USER'S DATA LIST to check the current settings of
your machine. For details, see
RECEIVE MODE SET
FAX/TEL AUTO SW
Selects <FAX/TEL AUTO SW> receive mode.
FAX ONLY MODE
Selects <FAX ONLY MODE> receive mode.
DRPD
Selects <DRPD> receive mode. This setting is only available in US and Canada.
NETWORK SWITCH
Selects <NETWORK SWITCH> receive mode. This setting is not available in some
countries and regions.
MANUAL MODE
92
Changing the Machine Settings
"Printing the USER'S DATA LIST" on page
37.
71.
Chapter 7