Canon Pixma MP530 User Manual page 23

Using the ADF
Note
Set a document on the Platen Glass if you want to scan it at optimum quality.
The area (range) within 0.08" / 2 mm from the top edge of document cannot be printed
since the machine cannot scan it.
Do not load the following types of documents in the ADF. They will jam.
– Wrinkled or creased paper
– Curled paper
– Torn paper
– Paper with holes
– Carbon paper or carbon-backed paper
– Surface treated paper
– Onion skin or thin paper
– Photograph or thick paper
1
Remove any documents from the Platen Glass.
2
Open the Document Tray.
3
Load the document in the ADF (1).
Load the document with the side you want to copy, fax, or scan face up in the ADF.
4
Adjust the Document Guides to match the document width (2).
Chapter 1
(2)
(1)
(A)
Before Printing
21