Adjusting Image Quality - Canon Pixma MP530 User Manual

If you select <MANUAL ADJUST> in step 2, use [
increase the density, then press [OK].
If you select <AUTO ADJUST (A)> in step 2, the screen below appears on the LCD.
100%
A
Note
When <AUTO ADJUST (A)> is selected, the document loaded in the ADF cannot be scanned.

Adjusting Image Quality

You can adjust the image quality according to the document to be copied.
1
Press [Image Quality].
IMAGE QUALITY
2
Use [ ] or [
STANDARD:
HIGH:
FAST:
3
Press [OK].
Note
When using <FAST>, if the quality is not as good as expected, select <STANDARD> or
<HIGH> and try copying again.
Select <HIGH> to copy in grayscale. Grayscale renders tones in a range of grays instead
of black or white.
Copying onto Both Sides of the Paper (Two-sided copy)
You can copy two document pages onto the sides of a single sheet of paper.
(A) Long-side stapling
(B) Short-side stapling
Procedure:
1
Press [Two-Sided] to select <STAPLE SIDE>.
2
Use [ ] or [
LONG-SIDE STAPLE: Staples on the long side of the paper.
SHORT-SIDE STAPLE: Staples on the short side of the paper.
Chapter 2
A4 STD
PLAIN
STANDARD
] to select the image quality.
Suitable for text-only documents.
Suitable for photographs.
Suitable for high speed copying at a lower image quality.
(A)
] to select <LONG-SIDE STAPLE> or <SHORT-SIDE STAPLE>.
] to decrease the density, or use [
0 1
(B)
Copying
] to
43