Scanned Image Not Displayed Properly; Trouble Scanning With Mp Navigator; Image Position And Size Incorrect When Scanning From The Machine's Operation Panel; Scanned Image Is Slanted Although Document Is Set Properly - Canon Pixma MP530 User Manual

Scanned Image not Displayed Properly

Cause
Scanned image prints out enlarged
(reduced).
Scanned image enlarged (reduced)
on the computer monitor.
Scanned image won't open.

Trouble scanning with MP Navigator

Cause
The original may not be scanned
correctly when [Document Size] is
set to [Auto Detect].
Image position and size incorrect when scanning from the machine's
operation panel
Cause
MP Navigator settings do not match
the originals.

Scanned image is slanted although document is set properly

Cause
When the [Correct the inclination of
text documents] check box is
selected, scanning may not be
performed properly depending on
the document.

Scanned image is rotated although document is set properly

Cause
When the [Detect the orientation of
text documents and rotate images]
check box is selected, scanning may
not be performed properly
depending on the document.
Chapter 9
Set the printing size in the application software.
Change the display setting in the application software.
Images opened in [Paint] or [Imaging] may be displayed in full size and
you may not be able to reduce its display size. Open the image in an
application software supplied with the scanner instead. Refer to the on-
screen manual for each application software for the detailed
procedures.
Change the resolution setting in the scanner driver and rescan. The
higher the resolution, the larger the resulting image will be.
Some application softwares do not display clear images at small image
display settings. Set the scale to 100%.
The file name extension is not supported by the application software.
Rescan the image using an application software, such as PageManager,
and change the file name extension when saving the image. Refer to the
on-screen manual for each application software for the detailed
procedures.
Set the [Document Size] to the actual size of the original, and scan it
again. If the size you need cannot be set, scan to a larger size and trim it.
For more information, refer to the Scan Guide.
Set the MP Navigator [Document Type] and [Document Size] to match
those of the originals being scanned. For more information, refer to the
Scan Guide.
Clear the [Correct the inclination of text documents] check box in MP
Navigator, then rescan the document. For more information, refer to
"[Scan Settings] Dialog Box" under "Using MP Navigator" in the Scan
Guide.
Clear the [Detect the orientation of text documents and rotate images]
check box in MP Navigator, then rescan the document. For more
information, refer to "[Scan Settings] Dialog Box" under "Using MP
Navigator" in the Scan Guide.
Action
Action
Action
Action
Action
Troubleshooting
145