Page of 24

Canon MP990 - PIXMA Color Inkjet Network Manual

Network guide (mac).
Also See for MP990 - PIXMA Color Inkjet:
Network manual - 19 pages
Manual - 10 pages
Installing Your Multifunction
to Your Network for the First Time
PIXMA MP990 / PIXMA MP640 / PIXMA MP560
Mac OS
1

   Also See for Canon MP990 - PIXMA Color Inkjet

   Related Manuals for Canon MP990 - PIXMA Color Inkjet

   Summary of Contents for Canon MP990 - PIXMA Color Inkjet

  • Page 1

    Installing Your Multifunction to Your Network for the First Time PIXMA MP990 / PIXMA MP640 / PIXMA MP560 Mac OS...

  • Page 2

    Navigation Tips for Macintosh Users To navigate this guide, please use the arrows on the MAC DOWN keyboard or use the PAGE UP and Page DOWN keys. LEFT RIGHT Page UP Page DOWN...

  • Page 3: Table Of Contents

    Installing Your Multifunction to Your Network for the First Time PIXMA MP990 / PIXMA MP640 / PIXMA MP560 Mac OS Preparing to Connect My Multifunction to My Network Network Requirements Important Information You Need Before Adding Your Multifunction Adding Your Multifunction to the Network Confirm Connection Status Downloading &...

  • Page 4: Preparing To Connect My Multifunction To My Network, Network Requirements

    Preparing to Connect My Multifunction To My Network Network Requirements Before connecting the machine to the network, make sure that configuration of the computer and access point or router is complete, and that the computer is connected to the network. Notes on Network Connection •...

  • Page 5: Important Information You Need Before Adding Your Multifunction

    Preparing to Connect My Multifunction To My Network An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless connection without using an access point, is not supported. Be sure to prepare an access point. Important Information You Need Before Adding Your Multifunction The following information is required to connect to your access point or router.

  • Page 6

    Adding Your Multifunction to Your Network Adding Your Multifunction to Your Network Step One Step Two Use the Easy-Scroll Wheel* (A) to select Settings, and Select Wireless LAN setup, and then press the OK button. then press the OK button. *Easy-Scroll Wheel location varies according to model.

  • Page 7

    Adding Your Multifunction to Your Network Step Three Step Four Select Yes, then press the OK button. Select Easy settings, and then press the OK button. When wireless connection is enabled, the Wi-Fi lamp** (B) lights blue. **Wi-Fi lamp location varies according to model.

  • Page 8

    Adding Your Multifunction to Your Network Step Five Step Six Select the access point name you wrote down, then When one of the following screens is displayed, enter the network press the OK button. key you wrote down, then press the OK button. If the following screen is not displayed, go to Step Eight.

  • Page 9

    Adding Your Multifunction to Your Network Step Seven Step Eight Make sure that the network key is correct, and When the completion screen appears, press the OK button, then then press the OK button. press the HOME*** button (C). ***HOME button location varies depending on model. The standby screen returns.

  • Page 10: Confirm Connection Status

    Adding Your Multifunction to Your Network Confirm Connection Status Step One Step Two Press the HOME*** button (A), select Settings using the Select Device settings, and then press the OK button. Easy-Scroll Wheel (B), and then press the OK button. ***HOME button location varies depending on model.

  • Page 11

    Adding Your Multifunction to Your Network Step Three Step Four Select LAN settings, and then press the OK button. Select Confirm LAN settings, then press the OK button.

  • Page 12

    Adding Your Multifunction to Your Network Step Five Select Wireless LAN setting list, then press the OK button. Make sure that Connection is set to Active, and then press the HOME button. It may take a while before the connection is complete. In this case, press the Back* button (C) and wait for about a minute, then display the Wireless LAN setting list screen again.

  • Page 13: Downloading & Installing The Drivers, Download Ingthe Driver

    Step Two Step One Select Multifunction Printers in the first menu dropdown, Go to the Canon USA Download Library Inkjet in the second and your model in the third. Click Go. Click here to go to the Canon USA download library...

  • Page 14

    Downloading and Installing the Drivers Step Three Step Four In the Drivers / Software Selection section, select In the Drivers section, click the link (red printing) for the MP Driver. your operating system in the Select OS dropdown menu.

  • Page 15

    If the firewall function of your security software is turned on, a warning message may appear that Canon software is attempting to access the network. If such a warning message appears, set the security software to always allow access.

  • Page 16: Installing The Driver

    Downloading and Installing the Drivers Installing the Driver Step Two Step One If the following message appears, click Open. Double-click the Setup icon.

  • Page 17

    Downloading and Installing the Drivers Step Three Step Four Enter your administrator name and password. Click OK. Select the place of residence. Click Next. If you do not know your administrator name or password, click Help , then follow the on-screen instructions.

  • Page 18

    Downloading and Installing the Drivers Step Five Step Six Click Easy Install. Click Install.

  • Page 19

    Downloading and Installing the Drivers Step Seven Step Eight Select Use the printer on network, then click Next. Read the License Agreement screen carefully and click Yes.

  • Page 20

    Step Nine Step Ten When the Printer Detection screen appears, click Next. On the Canon IJ Network Tool screen, select MPxxx series in Printers, then click Next. ('xxx' refers to printer model number). NOTE: If the machine is not detected, refer to the printed manual: Network Setup Troubleshooting.

  • Page 21

    Downloading and Installing the Drivers Step Eleven Confirm the measurement results, then click Finish. Ensure that is displayed in Connection performance between the printer and the access point. You can cancel measuring by clicking Cancel. You also examine the detailed status of the communication link after setup. If an icon other than appears, improve the communication status by referring to the displayed message or the help file, then click...

  • Page 22: Adding The Machine

    This section describes how to register the machine on a Macintosh computer. Step Two Step One Select Canon xxxx series ( 'xxxx' refers to the model) and click Add. When the Register Printer and Scanner screen appears, click Register Printer.

  • Page 23

    Downloading and Installing the Drivers Step Three Step Four When the Register Printer and Scanner screen appears, Select Canon xxxx series or xxxx series( 'xxxx' refers to the click Register Scanner. model) on the Scan-from-PC Settings screen, then click OK.

  • Page 24

    Downloading and Installing the Drivers Step Five Step Six When the Register Printer and Scanner screen appears, Click Exit. click Next.

This manual also for:

Mp990 - pixma color inkjet, Mp640

Comments to this Manuals

Symbols: 0
Latest comments: