Canon Pixma MP530 User Manual page 44

2
Use [ ] or [
ZOOM 25-400%
-
3
Use [ ] or [
Pressing [
Press and hold down [
Note
The ratio can be also input by using the numeric buttons.
4
Press [OK].
Using Automatic Copy Ratios (Fit To Page)
You can set the machine to automatically reduce or enlarge the document to fit the page size
you selected in <SIZE>.
1
Press [Enlarge/Reduce].
2
Use [ ] or [
ENLARGE/REDUCE
Note
When <FIT-TO-PAGE> is selected, the document loaded in the ADF cannot be scanned.
3
Press [OK].
The message <AUTO> appears on the LCD.
Note
If the document is not properly reduced or enlarged to fit the page size, use preset or custom
copy ratios and try copying again.
Adjusting Exposure (Intensity)
Exposure (intensity) is the degree of difference between light and dark. Increasing the exposure
setting further blackens dark areas and whitens bright areas. Conversely, decreasing the
exposure setting reduces the difference between bright and dark areas. You can adjust the
exposure between five gradations.
1
Press [Exposure].
INTENSITY
MANUAL ADJUST
2
Use [ ] or [
3
Press [OK].
42
Copying
] to select <ZOOM>, then press [OK].
100%
] to select a copy ratio by the percent between 25% and 400%.
] decreases the copy ratio and pressing [
] or [ ] to quickly advance through the ratios.
] to select <FIT-TO-PAGE>.
FIT-TO-PAGE
] to select the <MANUAL ADJUST> or <AUTO ADJUST (A)>.
+
] increases the ratio.
Chapter 2