Canon Pixma MP530 User Manual page 97

Office all-in-one
Hide thumbs Also See for Pixma MP530:
Table of Contents

Advertisement

Enables/disables Error Correction Mode (ECM) sending.
PAUSE TIME
Selects the pause length when you press [Redial/Pause].
AUTO REDIAL
Enables/disables automatic redialing.
REDIAL TIMES:
REDIAL INTERVAL:
TX START SPEED
Selects the speed at which the machine starts transmitting.
COLOR TX
When faxing in color from the ADF, enables/disables automatic converting the image into
black and white before sending if the destination fax device does not support color.
TX REPORT
Enables/disables automatic printing of a transmission report after sending.
ATTACH TX IMAGE:
DIAL TONE DETECT
If you selects <ON>, the machine transmits after confirming the dial tone. This function
may not be supported depending on your country or area.
RX SETTINGS
ECM RX
Enables/disables Error Correction Mode (ECM) during reception.
FAX/TEL AUTO SW
If you select <FAX/TEL AUTO SW> as the receive mode, customizes its settings.
RING START TIME:
TEL RING TIME:
DEFAULT ACTION:
DRPD:FAX RNG PAT
If you select <DRPD> as the receive mode, select the ring pattern for the machine. This
setting is only available in US and Canada.
INCOMING RING
If you select <FAX/TEL AUTO SW>, <DRPD> or <FAX ONLY MODE> as the receive
mode, enables/disables ringing for fax calls (A telephone must be connected to your
machine for ringing to occur).
RING COUNT:
Chapter 7
If you select <ON> as <AUTO REDIAL>, enables setting the
number of redialings.
If you select <ON> as <AUTO REDIAL>, enables setting the
length of time between redialings.
If you select <PRINT ERROR ONLY> or <PRNT FOR EACH
TX> as <TX REPORT>, enables/disables printing the first page
of the fax under the report (black & white faxes only).
Selects the time the machine takes to check whether a call is a
fax or voice call.
Selects the ring length for voice calls.
Selects whether the machine switches to receive mode after
the ring time has elapsed, or whether it disconnects the call.
If you select <ON> as <INCOMING RING>, selects the number
of rings for fax calls.
Changing the Machine Settings
95

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

0580b002

Table of Contents