Setting The Channels And Clock - Panasonic DMR-EZ28K Operating Instructions Manual

Setting the Channels and Clock

Preparation:
• Turn on the television and select the appropriate video input
to suit the connections to this unit (Example: AV input).
• These are the first settings you make upon buying the
unit. You don't need to make these settings again.
to turn the unit on.
– "HELLO" appears on the unit's display.
• When this unit is connected to a Panasonic TV (VIERA)
supporting HDAVI Control 3 via an HDMI cable (➔ 11),
it acquires the setting information from the TV. When the
Quick Start Setting screen appears (➔ 14, step 1)
Language:
e , r to select, then
• When the Quick Start Setting screen
appears after this step (➔ 14, step 1)
TV Aspect Ratio:
e , r to select "4:3 TV" or
"16:9 Widescreen TV", then
• When connecting to a 4:3 standard aspect TV:
Select "4:3 TV".
• When connecting to a 16:9 widescreen TV:
Select "16:9 Widescreen TV".
Quick Start Function:
e , r to select "On" or "Off",
then
Automatic Clock and Channel
Settings:
e , r to select "Yes" or "No",
then
• When connecting the cable from the wall
(cable TV or antenna) to the unit's RF IN:
Select "Yes".
The unit then displays the source selection
screen (➔ 13).
• When not connecting the cable from the wall
(cable TV or antenna) to the unit's RF IN:
Select "No".
The unit then displays "Set Clock Manually"
screen (➔ 13, Manual Clock Setting).
12
RQT9046
Select Language
Seleccione el idioma
Sélection de langue
English
Español
Français
Press OK
Pulse OK
Appuyer sur OK
Aspect Ratio Selection
Select TV type and press OK.
(Please refer to Operation Instruction
for details)
4:3 4:3 TV
16:9 16:9 Widescreen TV
Quick Start Setting
The unit can be turned on faster, in about
1 second. Please note that Quick Start
mode slightly increases power
consumption when the unit is off.
(See Operation Instructions for details)
Turn Quick Start on ?
On
Off
Automatic Clock and Channel Settings
Does this unit get its TV signal via RF IN?
Example: Antenna, Cable TV or Cable Box connected to the
unit's RF IN.
Yes
No
8
Tips
• "Quick Start" function (➔ 49)
If you set Quick Start to on, you can start
recording to DVD-RAM about 1 second
after you press [ ^ DVD POWER] to turn
the unit on and then sequentially press
[ * REC].
The following happens when you have
selected "On".
– Power consumption in standby mode
increases because power is supplied to
the unit.
To return to the previous screen
Press [RETURN].