Using An Hdmi (High Definition Multimedia Interface) Cable; Using An Rf Modulator - Panasonic DMR-EZ28K Operating Instructions Manual

Using an HDMI (High Definition
Multimedia Interface) Cable
When connected to an HDMI compatible unit, an
uncompressed digital audio and video signal is
transmitted, enabling you to enjoy high quality digital
video and audio with just one cable. When connecting to
an HDMI-compatible HDTV (High Definition Television),
the output can be switched to 1080p, 1080i or 720p HD
video.
Regarding "HDAVI Control" function (➔ 34)
• Please use HIGH SPEED HDMI cables that have
the HDMI logo (as shown on the cover).
It is recommended that you use Panasonic's
HDMI cable.
Recommended part number: RP-CDHG10
(1.0 m/3.3 ft.), RP-CDHG15 (1.5 m/4.9 ft.),
RP-CDHG20 (2.0 m/6.6 ft.),
RP-CDHG30 (3.0 m/9.8 ft.),
RP-CDHG50 (5.0 m/16.4 ft.), etc.
• Non-HDMI-compliant cables cannot be used.
Rear of Amplifier or
System Component
HDMI OUT
HDMI IN
HDMI cable
(not included)
AV OUT
OPTICAL
DIGITAL AUDIO OUT
O S VIDEO ( PCM/BITSTREAM )
Rear of this unit
• Set "HDMI Priority" and "HDMI Audio Output" to "On"
(➔ 54, 55). (The default setting is "On".)
Notes
• If connecting to equipment that is only compatible
with 2 channels output, audio with 3 channels or more
will be down-mixed (➔ 77) and output as 2 channels
(some discs cannot be down-mixed).
• For display units compatible with HDCP (High
bandwidth Digital Content Protection) that are
equipped with a digital DVI input terminal (PC
monitors, etc.):
Depending on the unit, images may not display
properly or at all when connecting with a DVI/HDMI
switching cable (audio cannot be output).

Using an RF Modulator

• If your Television does not have Audio/Video Terminals.
Connecting to a Television
Connect cables in steps
those on page 8) as follows.
RF
Modulator
RF IN
RF OUT
Rear of TV
HDMI IN
Connecting to a Television with a Video
Cassette Recorder or a Cable Box or
Satellite Receiver
Connect cables in steps
those on page 9 or 10) as follows.
Rear of Video Cassette Recorder or
Cable Box or Satellite Receiver
RF OUT
and
Cable from the wall
or antenna signal
Red White Yellow
step step
2 3
Red White Yellow
AUDIO IN VIDEO
R L IN
and
Cable from the wall or antenna
signal (Video Cassette
Recorder or Cable Box Only)
Rear of this unit
Red White Yellow
step
step
3
2
Red White Yellow
RF IN
AUDIO IN VIDEO
R L IN
RF OUT
(same as
Rear of this unit
Rear of TV
VHF/UHF
RF IN
(same as
RF Modulator
Rear of TV
VHF/UHF
RF IN
61
RQT9046