The types of transmission:
e , r to select "Antenna" or
"Cable", then
to start automatic channel/
clock setting.
Confirm the time, then
8
–
DST (Daylight Saving Time) shows the
summertime setting.
–
Time Zone shows the time difference from
Greenwich Mean Time (GMT).
Set Clock Automatically
Clock Setting completed successfully.
4/4/2007 11:15 AM
DST-----------
Time Zone----
OK
Tips
If the unit displays "No channels were found.", turn off the unit
•
and confirm the cable or antenna input is connected to the RF IN
terminal. Restart the set up again (➔ below).
If "Auto Clock Setting is incomplete." is displayed, press [OK]
•
and set the clock manually (➔ right).
•
If the clock is not correct, set the clock with "Adjust Time Zone"
(➔ 49) or "Set Clock Manually" (➔ 49).
•
You can delete channels you don't need after completing Auto
Channel Setting (➔ 46).
Restarting the Auto-Setup
(after relocation, for example)
1. When the unit is on and stopped, press and hold [CH 2 ] and
[CH 1 ] on the main unit at the same time for about 5 seconds.
The unit turns off.
2. Press [ ^ DVD POWER] to turn the unit on.
(The signal source and channel captions revert to their default
values. All scheduled recordings are cleared.)
To cancel in the middle
Press [RETURN].
Notes
Conditions of the received channel may cause automatic channel/
clock setting to take extra time.
Automatic Clock and Channel Settings
Please select the wire connected to RF IN.
Antenna
Cable
OK
See "Notes"
On
EST
(➔ right)
Manual Clock Setting
Perform steps 1–5 on page 12.
w , q to select the item you want
to change.
e , r to change the setting.
–
Repeat steps 6-7 to change other items.
to confirm new date and
8
time.
–
The clock starts.
Notes
•
The automatic clock setting can take a few minutes.
•
Time Zone
EST (Eastern Standard Time)
CST (Central Standard Time)
MST (Mountain Standard Time) = GMT –7
PST (Pacific Standard Time)
AST (Alaska Standard Time)
HST (Hawaii Standard Time)
For other areas: xx hr
•
DST (Daylight Saving Time)
If you select "On", the clock is advanced one hour beginning at 2
a.m. on the second Sunday in March and ending at 2 a.m. on the
first Sunday in November.
Set the DST period manually when it varies according to regions
(➔ below).
To set the DST period manually
1. Press [SETUP].
2. Press [ e , r ] to select "Setup" then press [ q ].
3. Press [ e , r ] to select "Clock Settings" then press [OK].
4. Press [ e , r ] to select "Set the time change dates for DST" then
press [OK].
5. Press [ e , r , w , q ] to set the "Month", "Day", "Hour", and "Minute"
then press [OK].
Set the time change dates for DST
Setup
Beginning
Month
Day
Hour Minute
3
2nd
SUN
2
:
00
Channel
Setup
End
Disc
Month
Day
Hour Minute
Video
11
1st
SUN
2
:
00
Audio
Display
Restore Default
OK
TV Screen
Set Clock Manually
Month
Day
Year
Hour Minute
1
/
1
2000
12
:
00
/
SAT
AM
DST
Time Zone
Off
EST
EST
= GMT –5
= GMT –6
= GMT –8
= GMT –9
= GMT –10
AM
AM
Reinitializes the
settings.
13
RQT9046