Connecting To A Television And A Satellite Receiver - Panasonic DMR-EZ28K Operating Instructions Manual

Basic Connection

Connecting to a Television and a Satellite Receiver

• Consult your satellite service provider about the appropriate satellite receiver to use.
• Additional coaxial cable and audio/video (AV) cable are required.
• If your TV does not have AV IN terminals (➔ 61).
Note: The terminals on the rear of your TV and Satellite Receiver may not appear as shown below.
Please read terminal labels carefully to ensure correct connections.
Rear of this unit
step
5
Satellite
antenna
75 Ω coaxial cable from the satellite antenna to the "SATELLITE IN" on the satellite receiver.
75 Ω coaxial cable (included) from the "RF OUT" on the satellite receiver to the "VHF/UHF RF
IN" on the TV.
Audio/video cable (included) from the "OUT" on the unit to the "AV IN" on the TV.
Audio/video cable from the "AV OUT" on the satellite receiver to the "IN1" on the unit.
AC power supply cord (included) from the "AC IN~" on the unit to a household AC outlet.
10
RQT9046
VHF/UHF
To a household AC outlet
(AC 120 V, 60 Hz)
step
1
SATELLITE IN
AUDIO IN VIDEO
R L IN
Red White Yellow
step
3
Red White Yellow
Red White Yellow
step
4
Rear of Satellite Receiver
Red White Yellow
AUDIO OUT VIDEO
RF OUT
R L OUT
Rear of TV
VHF/UHF
RF IN
step
2