Setting The Channels And Clock - Panasonic Diga DMR-EZ28 Operating Instructions Manual

Setting the Channels and Clock
DVD
POWER
®
To return to the previous screen
Press [RETURN].
©
Tips
• "Quick Start" function (-+ 49)
If you set Quick Start to on, you can start
recording to DVD-RAM about 1 second
after you press
[c!J
DVD POWER] to turn
the unit on and then sequentially press
[e
REG].
The following happens when you have
selected "On".
- Power consumption in standby mode
increases because power is supplied to
the unit.
=t1Y ..
J Yc:r- . ...
llFlIlt;I~;;'
.;~~].~~: ;~f~~;
,,~,
' . /;c ,
DVD
POWER
o
®
to turn the unit on.
~
- "HELLO" appears on the unit's display.
• When this unit is connected to a Panasonic TV (VIERA)
supporting HDAVI Control 3 via an HDMI cable
(~
11),
it acquires the setting information from the TV. When the
Quick Start Setting screen appears
(~
14, step 1)
Preparation:
• Turn on the television and select the appropriate video input
to suit the connections to this unit (Example: AV input).
• These are the first settings you make upon buying the
unit. You don't need to make these settings again.
a
Language:
.&.,
T to select, then
~
• When the Quick Start Setting screen
appears after this step
(~
14, step 1)
e
TV Aspect Ratio:
.&.,
T to select "4:3 TV" or
"16:9 Widescreen TV", then
~
• When connecting to a 4:3 standard aspect TV:
Select "4:3 TV".
• When connecting to a 16:9 widescreen TV:
Select "16:9 Widescreen TV".
o
Quick Start Function:
.&.,
T to select "On" or "Off",
then~
o
Automatic Clock and Channel
Settings:
.&.,
T to select "Yes" or "No",
then~
• When connecting the cable from the wall
(cable TV or antenna) to the unit's RF IN:
Select "Yes".
The unit then displays the source selection
screen
(~
13).
• When not connecting the cable from the wall
(cable TV or antenna) to the unit's RF IN:
Select "No".
The unit then displays "Set Clock Manually"
screen
(~
13, Manual Clock Setting).
r