Scheduled Recording
Refer to "Advanced Scheduled Recording" (➔ 23, 24) for detailed information on scheduled recording.
RAM -R -R DL -RW(V) +R +R DL +RW
Preparation:
•
Turn on the television and select the appropriate video input to suit the
connections to this unit (Example: AV input).
•
If the disc is protected, release protection (➔ 44).
RAM
•
Insert a disc with enough remaining blank space.
•
Confirm that the clock on the unit's display is set to the correct time.
•
If connected via a cable box or satellite receiver, set channel on that
equipment before scheduled recording starts.
e , r to select "New Scheduled Recording", then
w , q to move through the items and e , r to set
the items.
Channel/Input
Date/Frequency
On (start time) / Off (end time)
Mode
Name
To delete all items
1. Press [SUB MENU].
2. Press [ e , r ] to select "Delete", then press [OK].
− Repeat steps 2−4 to program other recordings.
when you have finished programming.
–
"z" lights on the unit's display.
–
Scheduled recording can be started only when the unit is turned off.
18
RQT9046
–
TV Station/External Input
To select a favorite channel
(To set Favorite Channels, see page 15.)
1. Press [SUB MENU].
2. Press [ e , r ] to select "Change Surf Mode", then press [OK].
3. Press [ e , r ] to select "Favorite", then press [OK].
–
You can set a daily or weekly program.
–
Hold button to change in 30-minute increments.
–
Recording mode, see page 21
–
Press [OK], see page 33.
Channel, Caption
Preview of selected
channel
Schedule List
Remaining Recording Time
DVD
1:58 SP
3/26 Tue 12:53 PM
No
Channel
Date
On
Off
Mode Check
New Scheduled Recording
Press OK to set new schedule.
OK
Timer Off A
S SUB MENU
CANCEL
SCHEDULED
Remaining Recording Time
DVD
1:58 SP
RECORDING
3/26 Tue 12:53 PM
Channel/
Date/
On
Off
Mode
Input
Frequency
4-1
--------
--:-- --
--:-- --
--
Surf Mode: All
Name
4-1 KPO-SD
Set Channel/Input.
OK
S
0
--
9
Number
SUB MENU
Cancel
Tips
Icons such as "
" indicate usable
RAM
discs. Refer to pages 62 and 63.
Notes
•
To prevent recording errors
Set a scheduled recording period slightly
longer than the actual program (to make
sure the program is recorded in full).
•
Be sure to perform step 5 before the
scheduled recording time. When the
unit is turned off, " z " lights on the unit's
display to indicate scheduled recording
standby has been activated.
•
" z " flashes when the unit cannot go to
scheduled recording standby. (e.g., a
recordable disc is not in the disc tray)
It does not flash if Quick Start is off.
•
When scheduled recordings are set to
start one immediately after another, the
unit cannot record the beginning of the
later program.
•
If two scheduled recording times overlap
the recording that started first always
has priority. The second recording will
start only after the first recording has
finished.
•
If two starting times is the same the
recording that programmed later always
has priority.
•
Depending on the Daylight Savings Time
(DST) settings for this unit, scheduled
recordings may be affected when the
seasons change.