Quick View (Play X1.3); Slow-Motion Play; Frame-By-Frame Viewing; Time Slip - Panasonic DMR-EZ28K Operating Instructions Manual

Quick View (Play x1.3)

RAM
Allows you to increase the play speed slightly without
distorting the audio.
During playback
(Press and hold.)
– Press again to return to normal speed.

Slow-motion Play

RAM -R -R DL -RW(V) +R +R DL +RW
DVD-V -RW(VR)
While paused
or
– There are 5 slow-motion speeds. Each press
increases the speed.
– Press [ q PLAY] to restart normal playback.
Notes
If continued for approx. 5 minutes, slow-motion play pauses
automatically (except ).
DVD-V

Frame-by-Frame Viewing

RAM -R -R DL -RW(V) +R +R DL +RW
DVD-V -RW(VR)
While paused
– Each press shows the next or previous frame.
– Press and hold to advance or reverse frame-by-
frame in succession.
– Press [ q PLAY] to restart normal playback.

Time Slip

RAM -R -R DL -RW(V) +R +R DL +RW -RW(VR)
Use to skip in 1-minute or 10-minute increments.
During playback
e , r to select the time, then
– Each press of e or r advances the interval
by 1 minute (press and hold for 10-minute
intervals).

CM Skip

RAM -R -R DL -RW(V) +R +R DL +RW -RW(VR)
Skips 1-minute forward with each press.
During playback

Create Chapters

RAM
During playback
Tips
You can skip to the start of a chapter by pressing [ u , i ].
Tips
Depending on the disc, some operations may not be possible.

Changing Audio during Playback

to select the audio.
Available audio will differ based on disc type.
See below.
and DivX
RAM -RW(VR)
Stereo Mono L Mono R
When playing an analog multilingual
RAM -RW(VR)
broadcast, you can choose between Main Audio and
SAP Audio.
Main Audio SAP Audio
DVD-V
This allows you to change items like the audio channel
number and the soundtrack language (➔ 42).
Soundtrack 1 ENG
e.g., English is the selected language.
Notes
If you cannot change the audio type when you have used only an
optical digital audio cable for connection, set "Dolby Digital" to "PCM"
(➔ 52). Alternatively, you may connect to an amplifier or system
component with an audio cable and change the input on the amplifier
or system component to suit the connection (➔ 60).
DVD-RAM
e.g.:
RAM
Play
"Stereo" is
selected. Stereo
Digital 3/2.1ch
27
RQT9046