Acquiring The Setting Information From The Tv (Viera) - Panasonic DMR-EZ28K Operating Instructions Manual

Setting the Channels and Clock

Acquiring the setting information from the TV (VIERA)

If this unit is connected to a Panasonic TV (VIERA) supporting HDAVI
Control 3 via an HDMI cable, then the setting information on the TV is
acquired by this unit when the unit is turned on for the first time. Please
proceed to the following steps.
The following screen is displayed in the language set on the VIERA.
– The language setting screen may be displayed depending on the usage
environment. Press [ e , r ] to select language, then press [OK].
Quick Start Function:
e , r to select "On" or "Off",
then
Channel information acquisition:
e , r to select "Set Channels
via VIERA Link", then
• Acquires the following information from the TV (VIERA).
– The types of transmission
– Channel Map
– Closed caption
When the settings are complete, the time confirmation screen is
displayed.
Confirm the time, then
– For details of the time information (➔ 13, Tips, Notes)
Set Clock Automatically
Clock Setting completed successfully.
4/4/2007 11:15 AM
DST-----------
Time Zone----
OK
14
RQT9046
On
EST
Quick Start Setting
The unit can be turned on faster, in about
1 second. Please note that Quick Start
mode slightly increases power
consumption when the unit is off.
(See Operation Instructions for details)
Turn Quick Start on ?
On
Off
Automatic Clock and Channel Settings
Please select how to set channels. It is possible to
download the channel information from your TV via
VIERA Link. In case you do not need channels, please
select "Set No Channels with this unit".
Set Channels via VIERA Link
Set Channels without VIERA Link
Set No Channels with this unit
OK
Tips
• If you do not want to acquire the
setting information from the VIERA
Press [ e , r ] to select "Set Channels
without VIERA Link" or "Set No
Channels with this unit", then press
[OK] in step 2.
– When connecting the cable from the
wall (cable TV or antenna) to the unit's
RF IN:
Select "Set Channels without VIERA
Link".
The unit then displays the source
selection screen (➔ 13, left column,
step 6).
– When not connecting the cable from
the wall (cable TV or antenna) to the
unit's RF IN:
Select "Set No Channels with this
unit".
The unit then displays "Set Clock
Manually" screen (➔ 13, Manual
Clock Setting).
• If "Automatic Clock and Channel
Settings" screen is displayed, the
channel information could not be
acquired from the TV (VIERA). Please go
to step 5 on page 12.
To return to the previous screen
Press [RETURN].
Notes
• Acquisition of the setting information
is not supported by all Panasonic TVs
(VIERA).
• The acquisition may take some time
depending on the VIERA setting
information.