LED Settings
LED Off
LED On with Laser
LED On with CTS
Activation Settings
Caution: When working with Activation settings, enable the settings you
want before disabling those you do
disable settings first, you may program the engine so it is
unable to read bar codes. if this happens, power cycle the
engine and scan the defaults bar code on
Activation Defaults
If you want the Activation default settings restored to your engine, scan
the Activation Defaults bar code below. The engine will reset to the
custom default settings (see
there are no custom defaults, it will reset the engine to the factory default
settings. Any settings that have not been specified through the custom
defaults will be defaulted to the factory default settings.
Setting Custom Defaults
Activation Defaults
* LED On with Good Scan
LED On when CodeGate
Disabled
not want to use. If you
page
1-4.
on page 1-4). If
3 - 5