Table of Contents
Advertisement
When Aimer on 100 milliseconds is selected, the aimer is on for 100
millisec-onds before the scan engine starts normal scanning operation.
Note: Aimer is not available in Class 1 Laser models.
* Aimer Always Off
Aimer Controlled by External AIming Pin
User-Specified Aimer Delays
If you want to set your own length for the duration of the delay before
acti-vation, scan the Before Activation bar code below, then set the
time-out by scanning digits (0-65535 seconds) from the
Chart, then scanning Save. Default = 0 seconds.
3-16
Aimer Always On
Aimer on 100 milliseconds
Before Activation
Programming
Advertisement
Table of Contents
