Code 11 - Honeywell N431X User Manual

Code 11

Code 11 On/Off
Check Digits Required
These options set whether 1 or 2 check digits are required with Code 11 bar
codes. Auto Select Check Digits determines the number of check digits
based on the length of the bar code. If the bar code is 10 digits or more, 2
check digits are required. If it is 9 digits or less, 1 check digit is required. The
check digit data is only transmitted if you program that fea-ture (see
Digit Validation
Required.
One Check Digit Required
Auto Select Check Digits
Required
6-20
<Default All Code 11 Settings>
On
on page 6-21). Default = Two Check Digits
* Off
* Two Check Digits Required
Check