Table of Contents
Advertisement
Step 1. Scan the 1st Left Identifier bar code, below.
Step 2. Use the
Programming Chart
Step 3. Scan Save.
Step 4. Scan the 2nd Left Identifier bar code, below.
Step 5. Use the
Programming Chart
Step 6. Scan Save.
Step 7. Scan the 1st Right Identifier bar code, below.
Step 8. Use the
Programming Chart
Step 9. Scan Save.
Step 10. Scan the 2nd Right Identifier bar code, below.
Step 11. Use the
Step 12. Scan Save.
Once you have programmed the concatenation sequence, use
User-Defined Concatenation Sequences On/Off
Default = 0.
1st Left Identifier
1st Right Identifier
ISBT 128 User-Defined Concatenation
Sequences On/Off
The following selections allow you to enable or require the User-
Defined ISBT 128 Concatenation Sequences.
If you scan Off, the User-Defined concatenation sequences are disabled.
If you scan the Allow User-Defined Sequence code, then the engine will
output only the data combination specified in the User-Defined
concatena-tion sequence you created.
Programming Chart
to scan 3, D (hex for "=").
to scan 4, 7 (hex for "G").
to scan 3, D (hex for "=").
to scan 3, C (hex for "<").
to enable this feature.
2nd Left Identifier
2nd Right Identifier
ISBT 128
6-27
Advertisement
Table of Contents
